Com Paint Touch up Spray Paint for Bikes & Scooters is available in multiple shades specific to various Motorcycles & Scooter brands and its variants. It is easy to use and gives a smooth finish and long lasting results and your Bike/ Scooter gets its beauty back.
Highlights
- Quickly Dries to Smooth and Fine Finish Can be used on other metal surfaces
- No additional/external equipment/ product required for application.
How to use
- Use in well-ventilated area, in shade & between (18°C – 30°C) temperatures for best spray results
- Clean the scratch area,
- remove any dust/ dirt/ wax polish etc.
- Shake Com-Paint can vigorously until Agitator Ball moves freely.
- Hold Can straight 25 cm (12”) from the surface.
- Spray in stroking motion to avoid dripping Apply light coats instead of a heavy one which might make paint to sag & run.
- Wait for 5 minutes between coats.
- Clean paint spray button after use.
- Let the touched up area dry for up to 72 hours for full curing of the paint film.
Precautions Do not use the product if the surface is hot to touch Use masking tape only as cello tape can cause paint to be removed Do not puncture the can, incinerate or store above 50° C. Do not place Can on a radiator, stove, in direct sunlight or near other heat source If spray gets into eyes flush with water. If swallowed, do not induce vomiting, call physician. Keep out of reach of children.
Meera –
Overall very happy—just keep the can moving for even coats. My Duke’s scratch is gone
Harish –
Finish was blotchy on my Vespa’s curves. Might be tricky for complex shapes
Nisha –
Blendability is top notch. My Gixxer looks fresh and the coat resists light scrapes
Sachin –
Needed three cans for full coverage on my FZ-V3’s tank. Better suited for small areas
Pooja –
Works well on plastic and metal. Dries fast—recommending to anyone who needs a quick fix
Amit –
Ideal for spot repairs. My bullet’s side panels are flawless now—exactly the original color
Ritika –
Good scratch remover but the clear coat yellowed a bit under harsh sun
Siddharth –
Professional results at home. My Hayabusa’s blue looks as vibrant as when it rolled off the showroom floor.
Shweta –
Nice glossy finish on my Ninja 300’s fairing. Just follow the prep steps and it sprays smoothly
Anil –
Nozzle clogged twice. Had to finish with a small brush, so prep your workspace
Geeta –
Fast drying and durable. I’d recommend wearing a mask—the fumes are strong but dissipate quickly
Karan –
Rust spots around the exhaust cover vanished after two coats—very impressed
Divya –
Shade was a bit darker on my TVS Jupiter. Took extra buffing to blend edges
Vikram –
Saved me a trip to the garage. Perfect color match on my Duke 200’s Graphic Red.
Neha –
Solid kit for the price. The clear coat gives a nice shine, though instructions could be more detailed
Manish –
Paint bubbled slightly after a week of rain. May work better in drier climates
Priya –
Super easy DIY—no runs, no drips. My Activa’s panels look brand new again after one coat
Rohit –
Coverage is decent, but deeper scrapes on my Pulsar needed light sanding first. Overall good for quick touch-ups
Sneha –
Great finish and fast drying. Had to shake well and use three thin coats, but the gloss turned out fantastic
Arjun –
Perfect match for my Royal Enfield’s Thunder Black. Covered small scratches and even out faded patches—looks showroom-fresh
Parvesh Mishra –
Original paint quality is different from received product. I have purchased gunmetal grey but color are very different now I have send my petrol tank to service center for match the coating
Deep K –
Great Customer Service, really recommend
Nikhil –
Very well worth the money.
Saanvi –
Great Customer Service, really recommend